Vermona action filter 4, Руководство пользователя

Страница: 31 / 36

30
Components and control
elements of the Action Filter
4
The Action Filter 4’s front panel
GAIN – make fit what doesn‘t fit
The GAIN control sets the input level in order to match the Action Filter 4 ’s
input to different output levels of connected units such as DJ-mixers, groove
boxes, audio-interfaces etc. In case, the output level of the connected unit is
pretty high by default, the
Action Filter 4 ’s inputs may clip. This is indicated by
a red LED located top right of the GAIN control. Typically, the level should be
set in a way that the LED only lights up shortly at absolute peak levels.
Overdrive created by high input gain settings can be used intended
to create especially powerful sounds. This will not harm the
Action
Filter 4 .
TRIGGER BYPASS - momentary or permanently
The BYPASS switch placed in the center of the unit toggles between the filtered
and unfiltered audio signal. In ON -position, BYPASS is active, meaning the
filters are inactive, passing the source signal to the outputs. This is indicated by
a blue LED.
With the switch set to OFF , the filter is active and the blue LED unlit.