72
Sending the internal clock as MIDI-clock
The internal clock may be send out as a MIDI-clock from the
MIDI OUT
jack. To do so, enable the
EDIT parameter
[4] SEND CLOCK
. Carry out the following steps to do so:
1. Make sure, the ’14 Analogsynthesizer is in standard play mode (
ARPEGGIATOR
switch set to
OFF
).
2. Enter the edit mode by pressing the
[EDIT]
button – the corresponding LED will be lit.
3. Use the
select dial to select the EDIT parameter
[4] SEND CLOCK.
4. Pressing the
VALUE
button activates or deactivates sending of the internal clock reference as
MIDI-clock data (activated if
VALUE
LED lit, deactivated if
VALUE
LED unlit).
5. Exit EDIT mode by pressing the
[EDIT]
button again.
