71
User Guide ’14 Analogsynthesizer
EN
Internal clock and MIDI-clock
The ’14 Analogsynthesizer has a built-in internal clock that serves as tempo- and synchronization-
reference for the LFO resp. the arpeggiator.
The speed of the internal clock is set by evenly hitting the
TAP
button three times. The yellow LED
located above will display the speed.
Activating MIDI-clock
Instead of the internal clock-reference an external MIDI-clock can be selected. To do so, deactivate
the EDIT parameter
[3] INTERNAL CLOCK
. Carry out the following steps to do so:
1. Make sure, the ’14 Analogsynthesizer is in standard play-mode (
ARPEGGIATOR
switch
i
set to
OFF
).
2. Enter the edit mode by pressing the
[EDIT]
button – the corresponding LED will be lit.
3. Use the
select dial to select EDIT parameter
[3] INTERNAL CLOCK.
4. Press
VALUE
to activate reception of the external MIDI clock (
VALUE
LED will be lit) or to
deactivate it (
VALUE
LED unlit). As soon as the external MIDI clock is activated, the internal
clock is disabled for internal use.
5. Exit EDIT mode by pressing the
[EDIT]
button again.
