Vermeiren V200, Инструкция по эксплуатации

Страница: 6 / 212

EN
V200
2011-01
Page 4
1.2 Technical specifications
Technical terms below are valid for the wheelchair in standard settings.
If other footrest / arm support or other accessories are used, the tabulated values will
change.
Make Vermeiren
Address Vermeirenplein 1/15, B-2920 Kalmthout
Type Manual wheelchair
Model V200
Maximum occupant mass 130 kg (286.6 lb.)
Description Min. Max.
Overall length with legrest 1010 mm (39.76 in.)
Effective seat width 390 mm
(15.35 in.)
420 mm
(16.54 in.)
440 mm
(17.32 in.)
460 mm
(18.11 in.)
480 mm
(18.90 in.)
500 mm
(19.69 in.)
Overall width (depends on the seat width) 590 mm
(23.23 in.)
620 mm
(24.41 in.)
640 mm
(25.20 in.)
660 mm
(25.98 in.)
680 mm
(26.77 in.)
700 mm
(27.56 in.)
Folded length 1000 m (39.37 in.)
Folded width 320 mm (12.60 in.)
Folded height 955 mm (37.60 in.)
Total mass 16,5 kg (36.38 lb.)
Mass of heaviest part 9 kg (19.84 lb.)
Static stability downhill 10° (in standard configuration)
Static stability uphill 7° (in standard configuration)
Static stability sideways 18° (in standard configuration)
Obstacle climbing 60 mm (2.36 in.)
Seat plane angle 0° 10°
Effective seat depth 440 mm (17.32 in.) 460 mm (18.11 in.)
Seat surface height at front edge 440 mm (17.32 in.) 530 mm (20.87 in.)
Backrest angle 5°
Backrest height 400 mm (15.75 in.)
Distance between footrest and seat 430 mm (16.93 in.)
Angle between seat and footrest 8°
Distance between armrest and seat 220 mm (8.66 in.) 240 mm (9.45 in.)
Front location of armrest structure 410 mm (16.14 in.)
Handrim diameter 535 mm (21.06 in.)
Horizontal location of axle (deflection) -40 mm (-1.57 in.) 34 mm (1.34 mm)
Minimum turning radius 1500 mm (59.06 in.)
Diameter Krypton PU Rear wheels 22" 24"
Tyre pressure, rear (driving) wheels Max. 3.5 bar
Diameter Krypton PU steering wheels 200 mm (7.87 in.)
Tyre pressure, steering wheels Max. 2.5 bar
Storage and use temperature + 5 °C (+41 °F) + 41 °C (+106 °F)
Storage and use humidity 30% 70%
We reserve the right to introduce technical changes. Measurement tolerance ± 15 mm / 1,5 kg / ° (0.59 in. / 3,3 lb. / 1,5°)
Tabl e 1: T ec hni c al s p ec i f i c a t ion s