RAPIDO Instructions Manual
Status: April-03
10
Î
Check that the steering lever is in the neutral central position when you push the on/off button,
since the electronics are inactive otherwise. You can eliminate this barrier by switching the
steering off and then on again.
Î
Your speed should be adapted to environmental conditions.
Adjust the driving electronics
to the length of your forearm.
Loosen the fixing screw (1)
beneath the armrest support
where your steering is
located. Pull the steering to
the desired position and lock
it again.
LOCKING-UNLOCKING SHARK CONTROLLER
1
Unlocking the Shark Controller
(repeat the complete procedure in case you did not finish it
before the countdown)
Locking the Shark
Controller
While the power is on, press
and hold the power button
for two seconds. The display
will turn off immediatly.
After two seconds all LED’s
will flash briefly and the horn
will sound a short beep.
The wheelchair is
turned off.
While the shark controller is
locked, press the power
button to turn the shark
controller on.
All LED’s will flash briefly.
The LED’s wil then perform
a slow right-to-left
countdown.
(approx. 10 sec.)
Press the horn button twice
before the countdown
is completed
(approx. 10 sec.)
The batterycharge will then
be displayed and the
wheelchair is ready for
normal operation.
