Oberon 889DXD
2016-06
Page 16
L
WARNING: Risk of tipping over - Variation allowed adjustments can still change the
stability of your scooter (tilt back or sideways).
L
WARNING: Risk of injury - Check that all the star knobs, levers, bolts are securely fixed
before driving with your scooter.
3.1 Tools
Wrench set n° 13
3.2 Manner
of
delivery
The scooter shall be delivered with:
1 frame with armrests, steering unit, rear and front wheels
1
footplate
2
seats
manual
Accessories
4
batteries,
motors
battery
charger
3.3 Adjusting the steering unit
The steering unit can be adjusted in 5 different positions to suit each driver.
L
WARNING: Risk of injury - Never adjust the angle while you are driving.
L
WARNING: Risk of injury - Turn the scooter off before you adjust the angle of the steering
column.
1. Push
lever
upwards.
These lever is on the left
side of the steering unit.
2. Adjust the steering unit in the desired position. By
placing the steering unit with the locking bolts in
the correct hole of the 5 holes of the adjustment
plate
.
Push the lever
back towards the adjustment
plate
.
3.4 Adjusting the seats
L
WARNING: Risk of injury - Never perform adjustments while you are driving.
L
WARNING: Risk of injury - Make sure that the seat is locked securely.
1. Loosen the star knob
just below the seat.
2. Place the seat higher or lower until the desired
height.
3. Retighten the star knob
.
4. Use the same instructions to adjust the other seat.
1
2
1