Oberon 889DXD
2016-06
Page 9
Devices like electric shavers and hair dryers will have no influence provided that they function
perfectly and their cabling be in an excellent condition. Please conform to the operating instructions
accompanying such electric instruments to ensure trouble free operating of your scooter.
2.2 Carrying the scooter
The weight of the frame and steering unit is 147 kg. This is very heavy to carry.
The best way to carry the scooter is to make use of neutral mode of the scooter. Place the scooter in
neutral and roll the scooter to the desired place.
2.3 Operating the brakes
To apply the brakes:
1. Let go of the speed or drive lever to stop the scooter.
2.4 Assembly or disassembly of the scooter
2.4.1 Assembly
Your scooter shall be delivered almost fully assembled. Only the seats, armrests must be mounted
and the backrest shall unfold. (refer to the next paragraphs of chapter 2.4)
2.4.2 Disassembly
To disassmbly your scooter remove the two seat, armrests and fold up the backrest.
(refer to the next
paragraphs of chapter 2.4)
2.4.3 Mounting or removing of seat
L
WARNING: Risk of injury - Make sure that the seat is locked securely.
To mount the seats on the scooter:
1. Mount the seat tube
in the tube of the lower
frame
.
2. Tighten the star knob
just below the seat
securely.
3. Use the same instructions to mount the other seat.
To remove the seats from the scooter:
1. Loosen the star knob
just below the seat.
2. Remove the seat tube
out the tube of the lower
frame
.
2.4.4 Mounting or removing of armrest
L
CAUTION:
Risk of clamping – Keep fingers, buckles and clothes away from the
attachment
point.
L
CAUTION:
Risk of injury – Do not drive your scooter without armrests.
To mount the armrest on the scooter:
1. Slide the horizontal tube of the armrest
in the tube just
below the seat
.
2. Push on the vertical tube of the armrest
until the desired
seat width.
3. Retighten the star knob
just below the seats.
The armrest of the scooter can be taken off for transportation.
1. Loosen the star knob
just below the seats.
2. Pull gently on the vertical tube of the armrest
. Slide until
the horizontal tube of the armrest
comes out the tube just
below the seat
.
1
2
3
1
2
3
