LiNX 200
2019-01
Operating console functions
7
EN
NL
4.2
Failures and blocks
When the operating console is powered and a failure appears, the ON/OFF
button starts blinking in red. The number of blinks indicates the fault code. In
case of a failure, one or all functions of the operating console are blocked. For
more information, see §5.
4.3
Battery status and charging
Risk of injuries and damage
Follow the charging instructions in the wheelchair instruction manual and the suppliers’
manual of the battery charger.
The battery charge indicator (located above the
on/off button) is used to indicate that your
wheelchair power is on. The indicator provides an
estimate of the remaining battery capacity.
In the following table all battery indications and their
meanings are collected.
Table 1: Battery charge indicator
Display
Description
Meaning
Remarks
All LED's dark.
System off.
All LED's are lit and the
green LED's are flashing.
System on.
High voltage warning:
battery voltage level has
risen above the high voltage
warning set-point.
Warning: battery too full.
Slow down if you are driving
down a slope.
All LED's are lit.
System on.
LED's show the charge
level.: Full battery (between
80 and 100% of full
capacity)
1 Green led is lit.
System on.
Battery level is decreasing.
WARNING
Battery
charge
indicator
