Express
2012-03
Page 12
2.7 Mounting or removing arm support
L
L
L
L
WARNING:
Risk of injury and/or damage - Make sure that the levers are
properly tightened before using the wheelchair.
L
L
L
L
WARNING:
Risk of tipping over - Check that the armrests are at the same height
on each side.
L
L
L
L
CAUTION:
Risk of clamping – Keep fingers, buckles and clothes away from the
attachment points of the arm supports.
The arm supports can be removed so the patient can be moved sideways. The arm supports
can also be removed for therapeutic purposes and to move the patient from the wheelchair.
To mount the arm supports on the electric wheelchair:
1. Mount the arm support in the rectangular tube .
2. Retighten the handle properly. (If the lever of handle
is not in a good position, press on button
on the
handle and place the lever in a good position that no
risk of injury to the hands can appear.)
To remove the arm supports from the electric wheelchair:
1. Turn on the handle
until it come loose. (If the lever
of handle
is not in a good position, press on button
on the handle and place the lever
in a good
position that no risk of injury to the hands can appear.)
2. Remove the arm support out the rectangular tube .
The armrests are adjustable in different heights over a range of 90 mm (stepless) Keep a
safe distance from 10 mm on the bottom of the arm support.
1. Loosen the lever a little.
2. Move the rectangular tubes
and
over each other until the desired armrest height.
3. Retighten the lever hand-tightened.
4. Check that the lever is securely fixed.
5. Adjust the other armrest with the same instructions.
2.8 Mounting or removing of the footrests
L
L
L
L
CAUTION:
Risk of injury – Make sure that the footrests are firmly fixated.
The mounting of the footrests is done as follows:
1. Hold the footrest sideways at the outside of the
wheelchair frame and mount the tube hood
into the
frame.
2. Swing the footrest inwards till it clicks in position.
3. Swing the foot plate downwards.
4. Check that the footrest is well fixated.
To take off the footrests:
1. Pull handle
.
2. Swing the footrest to the outside of the wheelchair till it
comes loose from the guidance.
3. Pull the footrest from tube hood
.