Vermeiren Eclips X4, Eclips X4 30, Инструкция по эксплуатации

Страница: 20 / 36

Eclips X4, Eclips X4 30°
2012-01
!"#$%&'%
* Rear wheel:
1.
Remove the rear wheels (see § 2.13).
2. Loosen the fixing screws from the rear axle block .
3. Push the axle block upwards or downwards to the desired height.
4. Tighten the screws properly.
5. Mount the rear wheels.
6.
Adjust the brakes according § 3.7.
Adjustment of the slope nuts from the steering wheels.
!
! !
!
" " " "
WARNING:
Risk of injury - Make sure that the eccentric screw settings are
identical on both front-wheel adapters and, before using the wheelchair.
This figure illustrates the principle. The position of the screw thread is indicated by a number.
A
Shows the frame when the seat is horizontal and the
adapter is perpendicular to the ground.
B Shows the frame when the seat is tilted slightly and the
adapter is not perpendicular.
Position 4
Position 3
Position 2
Position 1