Vermeiren Ceres SE, Инструкция по эксплуатации

Страница: 8 / 24

Ceres SE
2021-08
Before use
6
EN
NL
When you are not experienced to drive the scooter using ramps, you can also put the scooter in
neutral mode and push the scooter in the car using ramps.
When the scooter does not fit in the car, it is also possible to transport the scooter according to
the following steps:
1. Remove all loose parts prior to transport (seat, etc.).
2. Store loose parts safely.
3. If possible, remove the batteries / battery boxes to save weight.
4. Fold the steering unit down with the angle adjustment.
5. Place the scooter in the car with 2 or 3 persons.
6. Attach the frame of the scooter securely to the vehicle.
2.5 First use and storage
Risk of battery damage

Never completely discharge the battery.

Do not interrupt the charging cycle; only disconnect the battery charger when the battery is
fully charged.

Make sure that your scooter is stored dry and indoors to prevent mould from growing and the
upholstery from being damaged. If necessary, use a protective cover.

Check the technical details for storage, see chapter 6.
Ensure that the battery has been fully charged before using your scooter, ask your dealer if this
has already been done or not. To charge, follow the charging instructions in §3.7.
CAUTION