Vermeiren Bayo, Инструкция по эксплуатации

Страница: 15 / 36

Bayo
2014-04
Page 13
3.5.1 Positions of the footplate
By default the footplate is in a horizontal position.
With the emphasis on transport and rehabilitation and getting out of the Bayo, the footplate
must be turned into the direction of the undercarriage of the footrest.
The footplate has been equipped with plastic foot supports to prevent uncontrollable sliding
of the feet. As additional security, foot belts (B19) have been implemented.
The angle of the foot supports

can be
adjusted in 5 different positions (steps: 10°)
1. Loosen the wing nuts

.
2. Turn the foot supports

in the desired
position.
3. Retighten the wing nuts

.
4. Check the foot supports are firmly
fixated.
3.5.2 Adjusting the length of the footrest
Due to the super design of the Bayo, the
footrest can be set into 4 different lengths:
250 – 280 – 310 - 340 mm (steps: 30 mm).
Adjust them as follows:
1. Retract both blocking pins

.
2. Adjust the undercarriage of the footplate

into the desired position.
3. Block the undercarriage again with the
blocking pins

.
4. Check the footplate is firmly fixated.