Alya
2021-01
Using your scooter
10
EN
NL
•
The speed lever should be able to move freely at all times.
3.2.1 Switching ON/OFF
3.2.2 Driving
This paragraph is a first acquaintance with driving your scooter. Read the complete manual
first before you go for a ride.
The surface of the controller gets slightly warm during use.
1. Handgrips
2. Speed lever
3. Battery level
indicator
4. Forward /
Reverse button
5. Speed dial
6. Key
Switching ON using the key (6)
Place the key (6) into the slot.
The battery level indicator lights go on from left to right
before indicating the battery status.
Switching OFF using the key (6) Pull out the key (6) from the control panel. The lights of the
battery level indicator extinguish.
Switching automatically OFF
The scooter will be switched o
ff automatically if it hasn’t
been used for 30 minutes.
To start the scooter again:
•
Remove the key (6).
•
Put the key back into place.
Speed lever (2)
To start or stop moving.
The movement starts as soon as the lever is slightly pulled in a
squeezing motion. The more the lever is pulled, the faster the
scooter will move (up until the maximum speed setting). When
the lever is release, the electromagnetic brake is applied. The
scooter stops immediately.
Speed dial (5)
•
Turn the speed dial (5) clockwise to increase the maximum
speed setting.
•
Turn the speed dial counter clockwise to decrease the
maximum speed setting.
Forward / Reverse button (4)
•
Push the button upwards to move forwards.
•
Push the button downwards to move backwards.
2
1
3
4
5
6
