OWNER’S MANUAL
9/14
VERLINDE se réserve le droit de modifier sans préavis les caractéristiques de son matériel
VERLINDE
reserves the right to alter or amend specifications of its products without notice
12/2014 VESEFRSCXSRA01A
2 -General presentation of the system.
The controller is in the form of a 3U 19’’ rack, depth 460mm,
Power supply with CE plug P17 5P 32A 400Vac,
On front:
- Signaling lights,
- Emergency stop
- Hoist control 3-position reversing switches
- START button
- Line circuit breaker
- Hoist connector(s)
- Fuse holder
2.1 General operating conditions
Only authorized and skilled persons for the control of hoists are allowed to operate the
controller.
The controller does not check hoist travel; the user must, without fail, visually supervise all
hoists.
They must make sure:
-
Hoists are in good condition and serviceable,
-
They can visually check the travel of all hoists,
-
There are no persons under hoists or under structures/assemblies raised by hoists.
They must check:
-
The compatibility of the power supply with that of the controller,
-
Electrical connections,
-
The condition of power supply and hoist connection cables,
Operating temperature: -5/+45°C
Storage temperature: -30/+80°C
hygrometry: less than 85% RH.
2.2 - Routine maintenance and repairs
The controller must be looked over and repaired using approved procedures, carried out only
by authorized companies or by the manufacturer.
Any assembly or disassembly work is prohibited with power on.
Electrical connections must only be made or broken with power down by unplugging the
power plug.
1.1.1
2.3 Mainte
1.1.2
1.1.3
1.1.4
1.1.5
1.1.6
