STAGEMAKER CONTROLLERS
8 TROUBLE
SHOOTING
If your controller doesn’t work,
check;
•
the power source
: all three lamps should blink
•
the main switch (PRM series only)
: in AV or AR mode
•
the fuses
: switchbar in upper mode
•
thermal protection
: black button in down mode
•
if the emergency button is pressed
: turn anticlockwise and pull
•
pre-selection switch settings
: up or down mode
•
output cables
: connected
Warning:
Before going in the panel it self, or removing the top plate, first disconnect the main power
entry plug.
9 SPECIFICATIONS
•
Power supply
:
3 x 400 V – 50 Hz
or 3 x230 V – 50Hz
•
Controls direct switching models
:
230 Vac
•
Controls remote switching models
:
24 Vac
•
Maximum switching capacity
:
1.75 kW per channel at 400 V
0.9 kW per channel at 230 V
2004.07 GB
18
