Installation
Mounting 1/4
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
All specifications are subject to change without notice
Copyright © 2022 Verkada Inc. All rights reserved.
10
Use cardboard mounting template from the previous
step to get a sense of the wall space AC62 will occupy.
Use mounting template to drill pilot holes for the mount
plate.
Use the supplied screws to install the mount plate
onto the wall. Ensure that the Verkada V is pointing
towards the floor.
The enclosure will extend down roughly 31” (~79cm),
from the top of the mount plate.
The size of the enclosure is:
31” x 20” (79 x 51 cm)
Please Note
Leave at
minimum 2” clearance on the
left side of the enclosure in
order for the door to open
and close without hindrance.
Please Note
The supplied screws are
intended for plywood installations.
For other wall materials, ensure proper
load-bearing fasteners are used.