Verizon Visirun B1N, Руководство по установке

Страница: 12 / 34

Installation Manual v1.16
11
Optional connections
The Visirun GPS tracker allows the following optional connections:
DESCRIPTION CASES OF USE CONNECTION
K-Line Interface (B2 model only)
Driver Recognition,
Reading real-time data from
digital tachograph
RECOMMENDED OPTION
CN2, pin 20 and 15.
See circuit diagram on page 15
Primary CAN-BUS interface (B2 model
only) Reading real-time data from CAN-
BUS network and digital
tachograph, etc. CN1, pin 14 and 15.
SAE J1708 interface (B2 model only) Reading real-time data from SAE
J1708/J1587 network CN2 pin 12 and 13
Secondary CAN-BUS interface (B2 model
only) Remote data download from
digital tachograph. CN2 pin 10 and 9.
See circuit diagram on page 16
Remote device activation/deactivation
control (12 / 24V active, 0V deactivated) Door opening control, anti-
robbery button, digital input, etc. CN1, pin 5, 7 e 10, connector CN2 pin 1
(CN2 only on model B2).
Temperature Control with Visirun
temperature probe CN1, pin 4 connected to the light blue
wire of the Visirun temperature probe
Fuel level real time control CN1, pin 8 connected to the vehicle’s
factory-fitted float control output 0-12V
Remote engine cut-off CN1, pin 13 as mass control for the cut-
off relay (maximum consumption 300
mA)
IP67 Outdoor kit
Additional protection for outdoor
use. For trailers, swap bodies, etc. See page 17
Privacy function activation/deactivation
control (12 / 24V active, 0V deactivated) When this function is active, the
device stops to acquire data and it
doesn’t trace the route of the
vehicle.
CN1, pin 5, 7 e 10, connector CN2 pin 1
(CN2 only on model B2). Connect an
ON/OFF switch to 12/24V power source