5
6
Like any telephone line, there is a limit to the number of phones you can connect to
a single TX240G wireless terminal line. If too many phones are connected, the dial
tone or ring tone may be weak or voice quality may fade. Therefore, we recommend
you only connect three phones maximum to a single TX240G terminal line but this
may vary depending on your phone equipment.
Congratulations! Your home is now wired with TX240G wireless terminal.
E. Making First Call
1. To make a call, lift the handset of attached phone. Press dial digits.
Wait 3~5 seconds.
(Auto-dial time can be user configured. Refer to the user manual.)
2. When an incoming call comes in, the phone rings. Lift handset or press TALK
on the attached phone to answer the call.
F. Checking Voice Mail
Note: You may need to set up your voice mail before checking the voice mail.
1. When there are voice messages waiting, the MODE/MSG LED blinks.
When the handset is lifted, you can hear short stutter sound before dial tone.
2. Lift handset and press *86 to make call to voice mail system.
3. Check voice messages.
4. Hang up.
G. Activation
1. Turn on the power switch on the back of the terminal.
2. Check signal strength (green=good, orange=mid, red=low, no light=no service).
3. Lift handset of the phone and check the dial-tone similar to landline phone.
(Busy tone or hauling tone indicates no signal or error).
4. After checking dial tone, press *228. Wait 3~5 seconds and terminal will dial the
number, similar to landline phone.
5. When greeted by the activation system, follow the voice prompt to complete the
activation process, for example: press 1# to initiate activation.
6. Activation process may take up to several minutes. After the voice prompt
indicates activation is completed, hang up the phone.
Note: If activation fails, try again later or contact the service center.
