Stream TV MoCA Ethernet Adapter User Guide
Verizon Stream TV MoCA Ethernet Adapter User Guide
© 2021 Verizon, All Rights Reserved.
.
11
3
WEB USER INTERFACE
The Stream TV MoCA Ethernet Adapter works out-of-the-box without additional settings. If you want
to change settings (such as the IP address), you can configure via the device’s Web User Interface.
3.1
Setup requirements
To configure your Stream TV MoCA Ethernet Adapter via a computer, you need a router and
computer that meet the following system requirements:
-
A router supports RJ-45 LAN and MoCA LAN.
-
A computer supports:
•
An Ethernet RJ-45 (LAN) port (10Base-T/100Base-TX/1000Base-TX) or built-in Wi-Fi
adapter.
•
Web browser such as Internet Explorer, Firefox, Safari, or Google Chrome.
3.2
Log in the device’s Web User Interface
Make sure that the Stream TV MoCA Ethernet Adapter is properly connected to the home network
(Please refer to section 2 on how to install your Stream TV MoCA Ethernet Adapter). The computer
used to configure the Stream TV MoCA Ethernet Adapter should also be connected to the router via
an Ethernet cable or Wi-Fi (if the router supports Wi-Fi connection).
1.
Find the IP address of the Stream TV MoCA Ethernet Adapter from the home router.
2.
Open a web browser and enter the Stream TV MoCA Ethernet Adapter’s IP Address in the
address bar.
3.
The login dialog box is displayed.
4.
Enter the username and password.
Username:
admin
Password:
password can be found by scanning the QR code on your Stream TV MoCA Ethernet
Adapter’s product label. After scanning the QR code of the product label, you will find P:
xxxxxxxxx in the notification. xxxxxxxxx is the password of the device.
