Verizon User Manual
Smart-Cell Repeater
22
4.3.
Web UI Ranges Table
GUI Feature
Range
Description
Downlink and Uplink Output
Power Display
Below 0dBm to
35dBm
The output Power of the Repeater
Downlink Low RF Power
2dB to 10dB
Threshold for Low RF Power
Downlink and Uplink
Attenuation Control
0dB to 30dB
Reduces Gain Internally
Downlink and Uplink ALC
Limit
0dBm to 33dBm
Limits Output Power
Downlink RSSI Display
-100dBm to -27dBm
Downlink Receive Level at Donor
Antenna Port
Downlink Low RSSI
-93dBm to -57dBm
Threshold for Low RSSI
Downlink and Uplink AMP
Control
On/Off
High Powered Amplifier
Gain Balance Control
On/Off
Equalizes Uplink and Downlink Gain
Gain Balance Value
0dB to 15dB
Subtract Uplink Gain by G/B Value
Shutdown Control
On/Off
Shutdown if Major Alarm is Reported
Auto Gain Setting
On/Off
Automatic Gain Setting for the
Repeater
Auto Oscillation Check
On/Off
Preventing Oscillation
Temperature Display
32 to 260.6 Degrees
Internal Repeater Temperature
AMP Temperature Upper
Limit
0 to 299 Degrees
Threshold for Temperature Alarm
Band Blocks Used/Bandwidth
Each AMP
The Channel the Repeater will be
using
Delay Alarm Report
0 or 5 Minutes
Time Delay of Reporting after Alarm is
Detected