NETWORK (HOME/
OFFICE) CONNECTION
Once enabled and configured, the DHCP server automatically
assigns IP addresses to any network devices which are set to obtain
their IP address dynamically.
If DHCP Server is enabled on your Fios Router, configure the
network devices as DHCP Clients. There are 2 basic options in this
section: Disabled and DHCP Server.
To set up the Fios Router’s network bridge to function as a DHCP
server:
1.
In the
IP Address Distribution
section, select the
DHCP server. Once enabled, the DHCP server provides
automatic IP assignments (also referred to as IP leases)
based on the preset IP range defined below.
•
Start IP Address
– Enter the first IP address in the
IP range that the Fios Router will automatically begin
assigning IP addresses from. Since your Fios Router’s
IP address is 192.168.1.1, the default Start IP Address is
192.168.1.2.
