Rev. 09/01/2021
CR338
Pedestal Removal
1
2
3
5
6
4
click or scan QR code for video
Gently twist the removal tool to break the
adhesive bond.
Place the VP-1477 removal tool over
the pedestal with the indentation side
facing up.
Optionally, you can use the V-44 removal
tool. Wrap the removal tool’s cable
underneath the pedestal.
Alternate pulling the removal tool handles
with each hand, in a sawing motion, until
the pedestal is detached.
Tools & Parts Needed
VP-1446
V-44
VP-1477
or
KF-1106
Disarm the system by pressing the
green “unlock” button on the IR
Keyfob (KF-1106).
Use the magnet tool (VP-1446) to twist and
release the boot from the sensor.
IMPORTANT:
Do NOT try to pull up on the CR338 base. It can damage the
pedestal and/or the fixture. To remove a CR338 pedestal that’s adhered
to Verizon fixtures, follow the steps below.
