Verizon CR1000B, Руководство пользователя

Страница: 125 / 194

nEtwoRk SEttingS
• IP Address Distribution IP Address Distribution
The IP Address Distribution
IP Address Distribution section is used to configure
the Dynamic Host Configuration Protocol (DHCP) server
parameters of your Verizon Router.
Once enabled and configured, the DHCP server
automatically assigns IP addresses to any network
devices which are set to obtain their IP address
dynamically.
If DHCP Server is enabled on your Verizon Router,
configure the network devices as DHCP Clients. There
are 2 basic options in this section: Disabled Disabled and DHCP DHCP
Server Server.
To set up the Verizon Router’s network bridge to function
as a DHCP server:
1. In the IP Address Distribution IP Address Distribution section, select the
DHCP server DHCP server. Once enabled, the DHCP server
provides automatic IP assignments (also referred to
as IP leases) based on the preset IP range defined
below.
– Start IP Address Start IP Address – Enter the first IP address
in the IP range that the Verizon Router will
automatically begin assigning IP addresses
from. Since your Verizon Router’s IP address
is 192.168.1.1, the default Start IP Address is
192.168.1.2.
– End IP Address End IP Address – Enter the last IP address
in the IP range that the Verizon Router will