Verizon CME1000, Руководство пользователя

Страница: 53 / 68

53
05 / TROUBLESHOOTING
©2021 Verizon. All Rights Reserved
5.0d/ RESTORING YOUR WI-FI ExTENDER MINI’S DEFAULT
SETTINGS
There are two ways to restore your Wi-Fi Extender Mini’s default
settings. It is important to note that after performing either
procedure, all previously saved settings on your Wi-Fi Extender Mini
will be lost.
• Using the tip of a ballpoint pen or pencil, press and hold the
Reset button on the side panel of your Wi-Fi Extender Mini for at
least ten seconds.
• Access the UI and navigate to the Advanced Settings page.
Select Factory Default option. Click the Restore Default Settings
button. For additional details, refer to the section 4.3/ Factory
Default section of this guide.
Note: If you reset or reboot your Wi-Fi Extender Mini, you may also
need to disconnect your Wi-Fi Extender Mini’s power supply for a
few minutes (3 or more) and then reconnect the power.
5.0e/ LAN CONNECTION FAILURE
To troubleshoot a LAN connection failure:
• Verify your Wi-Fi Extender Mini is properly installed, LAN
connections are correct, and that the Wi-Fi Extender Mini and
communicating network devices are all powered on.
• Confirm that the computer and Wi-Fi Extender Mini are both on
the same network segment.