Table 1-7
5340 Appliance compute node rear panel features and connectors
(continued)
Function
Number
Serial port - Serial connection for Veritas Technical Support use only
4
Three stacked USB 3.0 Type A serial ports for general use
5
IPMI port - An external RJ45 port used for appliance remote management
purposes
6
eth0/NIC 1
A 1-GbE port copper connector that is reserved for use during the initial
configuration of the appliance. After completing the initial configuration,
you can connect NIC1 (eth0) to an administrative network that does not
provide any backup data transfer
For more information, see the
Veritas NetBackup™ 53xx Appliance Initial
Configuration Guide - Release 3.1
.
Note:
Veritas does not support forming a NIC bond using eth0/NIC1 with
other eth/NIC ports.
7
eth1/NIC 2
A 1-GbE port copper connector for general use
8
eth2/NIC 3
A 1-GbE port copper connector for general use
9
eth3/NIC 4
A 1-GbE port copper connector for general use
10
PCIe riser assembly 1 *
11
PCIe riser assembly 2 *
12
PCIe riser assembly 3 *
Contains two half height PCIe slots.
Note:
PCIe riser assembly 2 and riser assembly 3 are riveted together.
As a result, riser assembly 2 and riser assembly 3 are removed as one
unit.
13
22
About the NetBackup 5340 Appliance
About the appliance compute node rear panel
