AC power connector (IEC-60320-C14) to an external Power Supply Distribution Unit
(PDU) on a rack.
A
AC power connector (IEC-60320-C13) to an appliance or a storage device.
B
Note:
If your power distribution unit is not compatible with the IEC-60320-C13 plug,
then Veritas recommends that you purchase your power cable locally. Make sure
the power cable meets or exceeds the indicated power rating.
Network cable
The NetBackup Appliance communicates with data networks through an Ethernet
network cable. One end of the network cable connects to the management network
port or service network port of the appliance. The other end of the cable connects
to the network switch or an external gateway. Both ends of the cable use RJ45
connectors.
Figure 2-2
Network cable
Multi-Mode fiber optic cable
The NetBackup Appliance communicates with the Fibre Channel switch through a
multi-mode fiber optic cable. One end of the multi-mode fiber optic cable connects
to the 10GE service network port or the Fibre Channel port. The other end of the
cable connects to the Fibre Channel switch or other devices. The two ends of the
multi-mode fiber optic cable are LC connectors.
26
Cables
Network cable
