6
Enter the following command if you want to add a new user to access the IPMI
sub-system. Note that this is an optional step.
IPMI User Add <
User_Name
>
At the
New Password
prompt, enter a password for the user.
The default user name is
sysadmin
. The default password is
P@ssw0rd
,
where
0
is the number zero.
At any point in time, you can run the following command to view the users who
can access the IPMI:
IPMI User List
7
Type
Return
to return to the
Main_Menu
prompt.
8
Use a Cat5 cable to connect the remote management port to the network.
9
The appliance is ready for initial configuration. See the
NetBackup Appliance
Initial Configuration Guide
for the appropriate platform for information about
initial configuration requirements and procedures.
Note:
You can use the NIC1 or eth0 port after completing the initial
configuration.
Accessing and using the Veritas Remote
Management interface
The IPMI web interface is known as Veritas Remote Management. You can use
the Remote Management interface to log on to the NetBackup Appliance Shell
Menu.
Before you use the Remote Management interface, the following prerequisites must
be met:
■
The Remote Management interface must first be configured using the NetBackup
Appliance Shell Menu.
■
At least one power cable must be connected to a functioning power source.
■
At least one user must be enabled to use the LAN channel(s).
51
Verifying the operation of the appliance and configuring IPMI
Accessing and using the Veritas Remote Management interface