VERITAS Access 3340, Справочник по командам

Страница: 7 / 110

Overview
This chapter includes the following topics:
■
Scope of the Veritas Access Commands Reference Guide
■
Where to find the documentation
■
Using the Access Appliance shell menu
Scope of the Veritas Access Commands
Reference Guide
This document describes the commands that are used in the Access Appliance
shell menu. These commands are used in the following scenarios:
■
Access Appliance initial configuration. For example, the
Network > Configure
command for configuring eth1, the
Cluster > Configure
command for setting
up the Access cluster on the appliance.
■
Access Appliance node-level management. For example, the
Network > Date
command for setting the date and time, and the
Monitor > Hardware
command
for monitoring the node hardware.
For cluster-level management commands that are used in the Access CLI, refer to
the
Access Command Reference Guide .
See “Where to find the documentation” on page 7.
Where to find the documentation
The latest version of the Veritas Access Appliance documentation is available on
the Veritas Support website and the Veritas Services and Operations Readiness
Tools (SORT) website.
1
Chapter