Installing the disk drive carrier
Use the following procedure to install the replacement disk drive carrier.
To install the replacement disk drive carrier
1
Remove the replacement disk drive carrier from its ESD-protective bag.
Caution:
Verify that the capacity of the drive is the same as the capacity of the drive that is being
replaced. Veritas does not support populating the 5340/5350 storage shelf's individual disk drive
drawers with both 4-TB and 8-TB disk drives.
2
Lower the replacement new disk drive carrier into the slot, with the drive capacity label facing
towards you.
3
Push the drive downwards and hold it down while sliding the drive carrier plate.
This locks the drive in place.
4
Check that the release latch has returned to its locked position.
9
HSP 210: Disk Drive Carrier replacement: Veritas 5U84 Storage Shelf