Verismo V?585, Руководство по эксплуатации, Страница: 7 / 15

12 13
EN EN
Descaling
the machine
(when prompted)
Cleaning
the machine
(when prompted)
continued
The water hardness setting determines when the symbol for descaling lights up
in the display. (See page 18.)
Empty containers and then reinsert
into the appliance.
Fill water tank with descaling agent
and water according to descaling
chemical manufacturer�s directions.
Insert water tank. Place a container
under spout.
Remove and empty water tank. Filter
has to be removed before descaling.
Remove drip trays with used pod
container.
(Before removing the drip trays, make sure
that the spout is in its uppermost position.)
Lift and close lever.
°C
Press the Rinse button for at least
3 seconds.
1 2
3 4 5
6 7 8
Remove water filter.
min
0.6 L /
20.29 fl oz
Press the Rinse button. Rinses in
intervals until empty.
Remove drip trays with used pod
container.
(Before removing the drip trays, make sure
that the spout is in its uppermost position.)
Remove water tank. Fill tank with fresh
drinking water and reinsert it.
Place a container under spout. Press
the Rinse button. Rinses until water
tank is empty.
Wait until rinsing process is finished,
then empty container.
Remove and empty drip trays, drying
connector on lower tray with a dry cloth.
Reinsert trays with pod container.
Clean water tank. Refill water tank
(min. 0.3 L / 10.14 fl oz) and reinsert it.
Wait until rinsing process is finished,
then empty container.
Empty and clean drip trays, drying
connector on lower tray with a dry cloth.
Reinsert trays with pod container.
9 10 11
12 13 14
15 16 17
WARNING
WARNING: Make sure the lever is closed
completely during use. Extremely hot water
runs through the appliance when operating
(brewing, descaling, cleaning, rinsing). To
avoid the risk of scalding or other injury,
always keep the lever in the closed / down
position while machine is operating. Do not
reach under the spout and do not remove the
drip tray.
If the descaling process is interrupted, the
appliance automatically returns to descaling
mode when switched on again.
WARNING
WARNING: Make sure the lever is closed
completely during use. Extremely hot water
runs through the appliance when operating
(brewing, descaling, cleaning, rinsing). To
avoid the risk of scalding or other injury,
always keep the lever in the closed / down
position while machine is operating. Do not
reach under the spout and do not remove the
drip tray.
Only use descaling agents that are suitable
for the Verismo ™ System. Visit our website for
more information.
Carefully read the instructions for using the descaler
and comply with all safety instructions.
Carefully read the instructions for using
the descaler and comply with all safety
instructions.