Verismo V?585, Руководство по эксплуатации, Страница: 13 / 15

24 25
EN EN
Specifications and
servicing
Frequently asked
questions
Eco Mode
The appliance returns to Eco mode if it is unused for more than 30 minutes (factory setting). We recommend this factory
setting. The appliance uses considerably less energy in Eco mode (less than 0.5 W/h) than if it is always ready for operation.
220 – 240 V, ~ 50 Hz,
maximum 1455 W
1.45 m / 4.75 feet
P
maximum 275 psi / 19-bar
~ 3.5 L / 0.92 gallon
~ 4.5 kg / 9.9 lb
A
B
C
°C
A = 200 mm / 7.87 in
B = 406 mm / 15.98 in
C = 316 mm / 12.4 in
°C
maximum 160 mm / 6.3 in
min
max
10°C–45°C / 50°F–113°F
°C
Approximately 90°C / 194°F
Noise emissions do not exceed 70 dB(A)
Designed for beverage pods that bear the
Verismo™ System logo. Also compatible with
other K-fee® System pods.
Overview of water hardness:
Hardness range Water hardness in mmol
1 (soft) < 1.3
2 (medium-hard) 1.3 – 2.5
3 (hard) 2.5 – 3.8
4 (very hard) > 3.8
Ask your local water company for information
about the water hardness. The water hardness
level entered in the appliance determines
the period between descaling for optimal
operation.
Why is there a delay before the drink is dispensed?
The machine is adjusting to the right temperature to make your beverage.
After using the milk pod, why isn’t the drink dispensing immediately after pressing the Espresso or Brewed buttons?
After a milk pod, the machine requires up to 8–10 seconds to heat to the required temperature. Wait until lights stop blinking, then push
Espresso button.
How do I remove the pod container if it is jammed or overfilled?
Gently move the pod container back and forth while removing the container.
Why isn’t the beverage hot enough?
The machine may need to be descaled (refer to section “Descaling the Machine” on pages 13–14).
Why are all the buttons flashing at a fast rate for a prolonged period of time?
Try switching off the machine and unplugging the cord from the wall socket. If this problem persists, please visit Verismo.com.
Why isn’t the drink dispensing properly?
Ensure the lever is pressed down completely. If necessary, descale the machine (refer to section “Descaling the Machine” on pages 13–14).
Why does the machine switch itself off suddenly when it is used a lot?
The machine switches itself off as protection against overheating. If this occurs, let the machine cool down for about 30 minutes before
using it again.
How do I reset appliance to factory settings?
Switch off and unplug appliance. Keep the Rinse button and the Milk button pressed and plug in appliance. Then release both buttons.
What is the Eco mode?
The appliance returns to Eco mode if it is unused for more than 30 minutes (factory setting). The appliance uses considerably less energy in
Eco mode (less than 0.5 W/h) than if it is ready for operation.
Telephone Number:
United Kingdom: +44 (0) 208834 5050