Veripart VPWD101, Руководство пользователя, Страница: 22 / 58

21
Note!
•
Dry the filter door thoroughly before reinstalling it.
Cleaning the filter base
1. Open the cover.
2. Unlock the three locking levers and
take out the filter handle.
3. Remove the filter base and clean it.
If there is to much fluff on the filter,
clean it under running water. Dry the
filter thoroughly before reinstalling it.
4. Clean the rubber sealings around
both the filter and handle.
5. Reinsert the filter.
6. Lock the three locking levers and
ensure that the levers are in the
correct lock position.
7. Close the cover until you hear a
click.
=
Note!
•
The fluff accumulated on the filter will block the air circulation,
which will increase drying time and energy consumption.
•
Disconnect the power cord before cleaning!
•
Do not operate the dryer without the filter!
•
Clean the filter after each cycle to prevent fluff accumulation inside
the dryer.
Filter base
Cleaning the heat exchanger
Do not touch the heat exchanger with your hands, which may result in
injury.
Warning!
！ ！