Verint RP 500 Series, Монтаж и эксплуатация

Страница: 8 / 16

Installation / Initial Operation
Connecting diagram
Settings / configuration
Set the angle
Remove dome and fixing frame and detach screws from the camera module. Point camera module to the
correct picture section and fix screws afterwards. Attach dome with fixing ring with screws and thighten with
hexagon socket screw.
Sharpness setting (factory setting)
Loosen the hexagon socket screw for fixing the cover frame and open the dome camera by turning the cover
frame of the acrylic glass dome.
If the camera shows a blurred picture the lens focus can be readjusted. To do so, loosen the headless screw
above the lens. Screw the lens in or out until the picture is in focus.
NOTE
You only need to adjust the lense a few millimeters. When finished tighten the headless screw.
8