6.2.5
TURNING THE PRODUCT OFF IN THE UNLIKELY EVENT OF A
REMOTE HANDSET MALFUNCTION.
a)
In the unlikely event of the remote control handset malfunctioning (or if
lost or broken) after the appliance has been turned on, the fire can be
turned off via the emergency shut off switch on the control panel.
b)
To turn the product off, firstly remove the ashpan from the fire.
c)
Press and hold the emergency shut off switch until the fire shuts down.
The process may take up to sixty seconds to complete. (see Fig. 2
below).
d)
When the fire has shut down, release the emergency shut off switch.
e)
The appliance will now remain in the “off” position until activated by the
remote handset.
Fig. 2
REPLACING THE BATTERIES (REMOTE CONTROL MODELS ONLY)
ENSURE THE FIRE IS COOL BEFORE REPLACING BATTERIES
Remove the ashpan cover. The battery pack is located on the right hand side side
of the burner unit at the bottom. Carefully remove the pack and remove
batteries. Replace in the reverse order using 6 off 1.5V AA Alkaline Battery. It is
important that only an alkaline battery is used, otherwise premature battery failure
and leakage may result.
Emergency Shut Off
Switch Position on
Control Panel.
46
