f)
Fit log “D” into position at right hand side of centre of the fuel-bed base
log as shown below in figure 22, using the groove in the base log as a
guide for placement.
Fig. 22
g)
Fit log “E” into position at the centre of the fuel-bed as
shown below in figure 23, using the groove in the base log in the base
log as a guide for position.
Fig. 23
Warning : Use only the logs supplied with the fire. When replacing the
logs remove the old logs and discard them. Fit a complete set of logs of the
correct type. Do not fit additional logs or any logs other than a genuine
replacement set.
17
D
E