Edit#: 002
Title: VT42 Bilingual Manual, Trim to A5 size
Date: 02/21/20
Version: Rev5
How to Use — continued
Customizing the Length of Your Session
You can customize the length of your light therapy
session in 10 minute increments.
Step 1 - Touch and hold your finger on the center
control for 1 second.
Step 2 - Continue to hold your finger on the control
and select the length of your light therapy session.
Each bar of light represents ten minutes.
Step 3 - Remove your finger when the desired time
has been illuminated. The illuminated bar(s) will
pulse three times
to recognize the chosen session
time and indicate that the programming mode has
been completed.
Note: If you touch the control again before the
completion of the three pulses, you will be able to
continue to modify the session time.
Stopping the Countdown Timer
Touch and hold the countdown timer control until the illuminated bar(s) turn(s)
off. If you would also like to turn off the light, press the on/off button at the top
of the lamp to turn the power off completely.
power button
7
VT42_MAN_Rev5-002.indd 7
VT42_MAN_Rev5-002.indd 7
2/21/20 4:48 PM
2/21/20 4:48 PM