7
Job#: X.XXXX
Title: VT23 Manual Trim to A5
Date: 03/21/17
Version: Rev9
Instructions for Use
Use consists of sitting close to the HappyLight LED Energy Lamp with your
eyes open. While staying oriented toward the light, feel free to engage in other
activities such as reading, writing, hobbies and crafts, sewing, needlepoint,
applying make-up or working at your computer or desk.
Selecting a Location
• Place your Verilux HappyLight LED Energy Lamp on a table or other flat
surface above, at or below eye level depending on your desired result.
• For best performance, place the HappyLight as close as 6 inches but within
24 inches of your face.
CAUTION:
Avoid placing this lamp in areas that are exposed to direct
sunlight or close to heat-radiating products such as heaters. Do not place the
lamp on top of appliances that radiate heat.
1.
Insert the power jack connector end of the AC/DC
adaptor into the power cord receptacle located on the
back of the HappyLight. Then, connect the AC/DC
adaptor to an AC outlet.
2.
Turn on the lamp.
3.
The HappyLight LED Energy Lamp should be
positioned as close as 6 inches, but within 24 inches
of your face and should be slightly off-center. (See
diagram.)
Note:
Do not look directly into the lamp.
4.
Consider using the lamp on the high setting in the
morning and on the low setting in the afternoon.
The light from the HappyLight LED Energy Lamp
must be directed at your eyes; therefore, your eyes must be open to achieve the
full benefit.
Note: Tinted glasses reduce the amount of light reaching your eyes.
When you are feeling sluggish and lethargic, spend more time with the light,
sit closer to it or adjust the settings to increase the intensity. If you experience
edginess or are over-stimulated, move the light farther away or reduce session
times.
CAUTION:
Do not run the power cord over the top of the lamp. Always
place it behind the lamp.
Operation
þ
þ
ý
ý
VT23_MAN_Rev9.indd 7
3/21/17 12:08 PM
