VeriFone V205c, Руководство по установке

Страница: 19 / 36

S
ETUP
Loading Printer Paper
V205
C
I
NSTALLATION
G
UIDE
19
Loading Printer
Paper
Before you can process transactions that require a receipt or record, you must
install paper in the printer.
The V205c uses a roll of 57 mm wide x 40 mm, single-ply, thermal sensitive paper.
A pink out-of-paper indicator line appears on the edge of the paper before the end
of the roll. After this line appears, there is enough paper remaining on the roll to
conclude at least one more transaction.
1
Unlock the paper compartment by pulling up the latch and swinging the door
downwards.
Figure 10 Loading Printer Paper
2
Remove any partial roll of paper in the printer tray by lifting it up.
3
Loosen the glued leading edge of the new paper roll or remove the protective
strip. Unwind the paper roll past any glue residue.
4
Hold the roll so the paper feeds from the top of the roll.
5
Load the paper roll as shown in Figure 10, with the edge of the paper on the
top of the roll.
6
Swing the paper roll cover until it clicks shut, allowing a small amount of paper
(past the glue residue) to extend outside the printer door.
Connecting
Optional
Devices
The V205c device supports some peripheral devices designed for use with
electronic point-of-sale terminals.
CAUTION
Poor-quality paper can jam the printer and create excessive paper dust. Store
thermal paper in a dry, dark area. Handle thermal paper carefully: impact, friction,
temperature, humidity, and oils affect the color and storage characteristics of the
paper. Never load a roll of paper with folds, wrinkles, tears, or holes at the edges.
1
2
CAUTION
Before connecting any peripheral device, remove the power plug from the
terminal. Reconnect the power cord only after you are finished connecting the
peripheral device(s). For complete information about peripheral installation and
use, refer to the user documentation supplied with those devices.