VeriFone Omni 3200SE, Руководство по установке

Страница: 20 / 36

T
ERMINAL
S
ETUP
Perform Power-On Printer Test
20
I
NSTALLATION
G
UIDE
When the terminal has power, the LCD screen lights and the LED indicator
flashes on and off if the printer has no paper, or remains lit if there is paper
loaded.
If an application is loaded in the terminal, it starts after the initial VeriFone
copyright screen and displays a unique copyright screen. If no application is
loaded in the terminal,
DOWNLOAD NEEDED
appears on screen after the initial
VeriFone copyright screen.
Perform Power-
On Printer Test
After installing a paper roll, perform a quick test to make sure the thermal printer is
operating correctly:
1
Temporarily disconnect the terminal from its power source by removing the
power connector from the power port on the back panel (see Figure 12 ).
2
Press and hold down the paper feed button, then insert the power connector
into the power port. The printer test starts automatically, and then stops after a
few seconds.
3
When the Omni 3200
SE
/3210
SE
terminal initiates its test printout, release the
paper feed button. The complete test printout shows printer information and
repeating character strings of various sizes.
4
After completing the power-on printer test, press the paper feed button to
advance the paper roll a few centimeters (about an inch), then tear off the
printout using the serrated metal tear strip.
WARNING Do not plug the power pack into an outdoor outlet or operate the terminal
outdoors. Also, disconnecting power during a transaction can cause transaction
data files not yet stored in terminal memory to be lost.
NOTE
To protect against possible damage caused by lightning strikes and electrical
surges, consider installing a power surge protector.