VERIDT INC · Middleton, WI 53562
1 6
www.veridt.com
2022
• T E C H N I C A L N O T E •
Verify Identify
IP Configuration for EWAC Lantronix
Note:
Most PACS controllers DO NOT have adequate power both reader and the
EWACS. Use an appropriately sized power supply for the PACS panel. For
example, for an eight-door panel, the power supply must be rated for at
least 6 A (apply a 50 percent margin when sizing the power supply).
1. Start the Lantronix Device lnstaller. The application should display a screen like the one shown here.
The two Lantronix devices depict two different EWAC board.
2. At the main window, select the IP address that you want to configure.
3. Select the Web Configuration tab in the right pane.
4. When the login dialog displays, enter your Username and Password.
5. The default Username is
admin. The default Password is PASS.
6. The right panel that displays should resemble the one shown below
Figure 7 • Lantronix Device Installer Opening Window
Figure 8 • IP Configuration
#121
Installation Guide
Stealth Readers
