background image

ATEX Instruction Manual

Dura 05-55  

Version 1.0v-07/2019

12 | Page

5  Limitations for use in ATEX 

Environment

5.1   Speed Limitations

5.2   Maximum Pressure

5.3   Maximum Temperature

5.4   Lightning Strike

 End  user  to  take  provision  that  pump  will  be  protected 

against lightning strikes.

5.5   Ionising Radiation

Pump is not approved for use in radioactive area.

Standard, background radiation is permissible (< 50,000

Bq) Motor Protection.

5.6   Motor Protection

 1.  Motor must have PTCs fitted and correctly installed.

 2.  Motor must be protected by motor overload relays or 

equivalent. 

 3.  Motor must be protected in event of overload condi-

tion. 

 4.   ‘Ex’ motors for vertical mounting (shaft down) should 

be equipped with a Drip Cover (Impact Canopy) over 

the Fan Cowl.

5.7   Pumped Media

 

The ATEX certification is only valid when pumping media 

that is approved by Verder. Using the pump with media 

that is not approved by Verder will make this certification 

void.

5.8   Hose Material Limitation

The following hoses 

can

  be used on ATEX pumps

(when applicable):

 NBR - Nitrile Rubber

 NBR(F) - Nitrile Rubber (food grade)

 EPDM - Ethylene Propylene Diene Monomer

 NR - Natural Rubber

The following hoses 

cannot

  be used on ATEX

pumps:

 CSM - Chlorosulfonated polyethylene

5.9    Limitation for Inserts that can  

   be used

The following inserts are suitable for use in an ATEX

environment:

 Stainless steel

The following inserts 

cannot

 be used on ATEX

pumps:

 PP - Polypropylene

 PVDF - Polyvinylidene fluoride

Pump Type

Maximum output 

RPM

Minimum output 

RPM

D5, D7, D10, 

D15, D25 and 

D35

60 RPM

-

D5, D7, D10, 

D15 and D35

-

12.5 RPM

D25

-

16.7 RPM

D45

79RPM @ 5 Bar

59RPM @ 10 Bar

38RPM @ 16 Bar

12.5 RPM

D55

47RPM @ 5 Bar

38RPM @ 10 Bar

38RPM @ 16 Bar

12.5 RPM

Table 10  Dura 05-55 - Maximum /Minimum Output

Pump Type

Maximum Discharge 

Pressure BAR 

D5 and D7

8 BAR

D10 and D15

12 

BAR

D25 and D35

16 

BAR

D45 and D55

16 

BAR

Table 11  Dura 05-55 - Maximum Pressure

Pump Type Maximum Medium 

Temperature

Maximum Ambient 

Temperature

D05-55

40°C

40°C

Table 12   Dura 05-55 - Maximum Temperature

Содержание VERDERFLEX Dura D10

















Отзывы: