VERDER VERDERAIR VA 25 Скачать руководство пользователя | Manualshive

Страница: 10 / 35

background image

10

859.0089

Replace Seals or Rebuild Air Valve

NOTE: Repair kits are available. See page 25 to order
the correct kit(s) for your pump. Air Valve Seal Kit parts
are marked with a †. Air Valve Repair Kit parts are
marked with a



. Air Valve End Cap Kit parts are

marked with a



.

Disassemble the Air Valve

1.

Perform steps 1-5 under Replace Complete Air
Valve, page 9.

2.

See F

IG

. 3. Use a Torx screwdriver (T8 for alumi-

num centers, T9 for plastic centers) to remove two
screws (209). Remove the valve plate (205),
cup assembly (212-214), spring (211), and detent
assembly (203).

3.

Pull the cup (213) off of the base (212). Remove the
o-ring (214) from the cup.

4.

See F

IG

. 3. Remove the retaining ring (210) from

each end of the air valve. Use the piston (202) to
push the end caps (207, 217) out of the ends.
Remove end cap o-rings (206).

5.

Remove the u-cup seals (208) from each end of the
piston (202), then remove the piston. Remove the
detent cam (204) from the air valve housing (201).

Reassemble the Air Valve

NOTE: Apply lithium-based grease whenever instructed
to grease. Order Verder part number 819.0184.

1.

Use all parts in the repair kits. Clean other parts and
inspect for damage. Replace as needed.

2.

Grease the detent cam (204) and install into hous-
ing (201).

3.

Grease the u-cups (208) and install on the piston
with lips facing toward the center of the piston.

4.

Grease both ends of the piston (202) and install it in
the housing (201), with the flat side toward the cup
(212). Be careful not to tear u-cups (208) when slid-
ing piston into housing.

5.

Grease new o-rings (206) and install on the end
caps (207). Install the end caps into the housing.

6.

Install a retaining ring (210) on each end to hold end
caps in place.

F

IG

. 2. Air valve u-cup installation

Lips face down

Lips face up

208



†

208



†

202



ti12754a

«
...
8
9
10
11
12
...
»

Содержание VERDERAIR VA 25




































Отзывы:

Нет отзывов

Похожие инструкции для VERDERAIR VA 25

Бренд: Underhill Страницы: 2

Бренд: Wacker Neuson Страницы: 42

Бренд: T.I.P. Страницы: 134

Бренд: Tacmina Страницы: 80

Бренд: Dimplex Страницы: 64

Бренд: Becker Страницы: 6

Бренд: Lochinvar Страницы: 1

3D TRASAR Series

Бренд: Nalco Страницы: 243

Бренд: WAGNER Страницы: 120

Бренд: Graco Страницы: 32

ARO PF20 B Series

Бренд: Ingersoll-Rand Страницы: 8

Бренд: KNF Страницы: 56

Бренд: red lion Страницы: 4

Бренд: COSMOGAS Страницы: 182

Бренд: Carver Pump Страницы: 42

Бренд: Reliance Water Heaters Страницы: 40

Бренд: Ingersoll-Rand Страницы: 16

Tower APUMP-HE Series

Бренд: TFC Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды