VERDEGRO TMA-US 100K, Эксплуатация и обслуживание

Страница: 27 / 38

Page 27 of 38
Manual TMA-US-100K
10 Maintenance
Scheduled maintenance keeps the TMA in safe and reliable condition. From the maintenance
schedule and checklist for the annual inspection shows what measures are required. Read for the
maintenance of the TMA the entire manual carefully!. If in doubt about the maintenance work it is
better that it is carried out by the manufacturer. If not, than it must be done under supervision of the
manufacturer, for example by an official distributor. Distributors can be found on the website
www.verdegro.com
10.1 Check hydraulic oil
The TMA has an oil level in the tank.

Open the hydraulic compartment

Make sure the machine is reasonably flat

Before opening the cap or around the filling is clean, clean it if necessary.

Add the oil with a special pump with filter. The use of the oil directly from the can to pour.
Term Actions
Daily or before
any start up Check level Hydraulic oil
Check bearings parts
Check hydraulic hoses and cylinders, pipes and fitting
Check operation of emergency and safety devices
Piston rods outrigger daily check for debris, leaks or damage. If
severely polluted or clean brine is presents.
Try all in normal position
Each 500 h Lubricate all bearings and sliding surfaces
Turntable bolts tightened
Check condition of cylinders and outrigger
Each 1000 h of latest
6 months Check of total TMA
Every 12 months Annual inspection. + Full service preventive replacement valves and
seals.
Cushion Check daily for damages
HYDRAULIC
Oil volume 10,0 liter
Oil quantity (applications of -10° to + 50°) UNIVIS 32
GUIDED BEARINGS
-Multy duty grease EP2 (example Shell alvania EP2/ Esso beacom EP2)
SLIDEWAYS arrow
-Only clean and lightly spray with WD40
TURNTABLE
- Multy duty grease EP2 (example Shell alvania EP2/ Esso beacom EP2)