Verbatim NAS HARD DRIVE, Руководство пользователя

Страница: 5 / 52

5
5. Reset Button. If the NAS drive is having a problem connecting to the local area network (LAN)
or appears to be hung, press the reset button momentarily using the end of a paper clip. This
will cause the unit to reset, similar to rebooting your PC. If the problem persists, or if you are
unsure of current settings (such as forgetting your administration password), press and hold
in the Reset button for 5 seconds. This will restore the factory default settings.
6. Fan. The fan is designed to turn on for added cooling whenever the internal temperature
rises above the thermal set point. To allow for adequate air fl ow take care not to block the
air vents. Since the spinning disk will generate heat even when no data is being transferred,
you can help to prevent the fan from remaining on needlessly by shortening the disk
spin-down time (see later under NAS Administration Reference / Advanced / Maintenance /
Disk Utility).
About the Hard Disk
The NAS drive internal hard disk comes pre-formatted in EXT2 format for immediate use for
network storage.
Note: Capacity dependent on model. 1 MB = 1,000,000 bytes / 1 GB = 1,000,000,000 bytes / 1 TB = 1,000,000,000,000 bytes.
Some capacity used for pre-loaded software, formatting and other functions, and thus is not available for data storage. As a result,
and due to differing calculation methods, your operating systems may report as fewer megabytes/gigabytes/ terabytes.
Your product’s hard drive is a complex electronic storage system and should be handled with care,
as you might treat a sensitive portable computer or other state-of-the-art consumer electronics
product. Do not subject it to shock, high temperatures, or strong magnetic fi elds.
To extend the useful life of your NAS drive, turn the unit OFF when not in use.
Locating NAS Drive on Your Desk
Place the NAS drive on a sturdy desk or table that is free from clutter that could block airfl ow
around the unit.