Verbatim NAS HARD DRIVE, Руководство пользователя

Страница: 31 / 52

31
Information
Basic information about your system, such as the fi rmware version number and IP address, can
be displayed by selecting Advanced / System / Information. There are no user settings on this
screen.
Disk Usage
Basic information about your hard disk, such as total and free space, can be displayed by
selecting Advanced / System / Disk Usage. If you have a USB storage device connected to one of
your USB-A ports as described previously under “Attaching a USB Storage Device”, then you will
also see information about this device on the screen.
Error Notifi cation
The NAS drive features a range of features to monitor product status and to report errors. To
enable and setup these features, select the screen at Advanced / System / Error Notifi cation.
These settings are grouped into four sections, as described below. After completing this form,
press Save to save your changes.
Monitoring Services
Here you may select which of the following four functions you would like to monitor:
• Disk Usage. A message will be generated when storage use reaches approximately 90% of
total capacity.
• Windows File Sharing Server. A message will be generated as a result of an error detected
with the Samba protocol.
• FTP Server. A message will be generated as a result of a detected FTP error.
• DHCP Server. A message will be generated as a result of an error detected with the DHCP
Server.
Check Interval
Enter how frequently you would like functions to be checked. The options are hourly or daily.