CONFIGURATION
B000882
VL FLEX CONFIGURATION
1.
READ THE VL FLEX CONFIGURATION
Launch the “VL Flex Configurator” App and read
the actual configuration of the device by
“tapping” the smartphone onto the front lens.
The READ operation is mandatory before the
WRITE operation is allowed.
After the readout, the App will be set with the
current VL Flex configuration.
NOTE: The antenna position on the smartphone
depends on the model.
Please refer to the smartphone manufacturer
manual.
2.
CHOOSE DISPLAY LAYOUT
Use the “Layout” section to choose between the
Single and the Dual screen layouts.
The “preview” picture on the top of the App
screen will update accordingly.
If the Dual layout is selected, the App will extend
the gauge settings to configure both the screen
fields.
3.
SELECT GAUGE TYPE
Tap the “Gauge Type” item in the “Data
Selection” section to choose the data you want to
display on the VL Flex.
If the Dual screen layout was selected, you will be
able to select the value to display for both the top
and the bottom sections of the dual screen.
Note: See the complete list of supported gauge
types in the “Supported Configurations” table of
this document.
Содержание VL FLEX 52 INDUSTRIAL
