ELECTRICAL INSTALLATION
B001457
ELECTRICAL INSTALLATION
WARNING
•
Refer to the safety rules described in the electrical connections section of the safety information
chapter of this document!
Depending on the configuration, insert the cable into the
8-pin contact enclosure according to the following pin
assignment.
The contacts must audibly lock into place.
Now insert the plug into the gauge.
Note the inverse polarity protection nose in the process.
Pin No. Wire color
Description
1
Red
Supply voltage (12V / 24V)
2
Black
Ground (for continuous sound)
3
n.c.
4
n.c.
5
n.c.
6
Blue / Red
Ground (for intermittent sound)
7
n.c.
8
n.c.
Only one of the ground connections is used. If the alarm should make a continuous sound, only the pins 1
and 2 should be connected. If there should be an intermittent sound connect only the pins 1 and 6.
