Veratron B00042201, Руководство по эксплуатации, Страница: 8 / 79

CONFIGURATION
B000647
CONFIGURATION
LINKUP CONFIGURATOR APP
To configure the sensor, some parameters like sensor type, its calibration or warning threshold, must be
calibrated through the Link Up gateway.
This is possible through the “Link Up Configurator” smartphone App, which can be downloaded free of
charge from the stores of both Android and iOS devices.
A simple and detailed explanation of the configuration process is also available as in-app instructions.
Thanks to the passive embedded NFC receiver, the Link Up gateway can be configured, as described below,
without the need of a power supply.
LINK UP
CONFIGURATOR
SENSOR CONFIGURATION
1. Launch the “Link Up Configurator” App and read
the actual configuration of the Link Up device by
“tapping” the smartphone onto the Link Up
wireless area (indicated by the NFC symbol)
The readout is necessary before you can write
new configurations on the Link Up
NOTE: The antenna position on the smartphone
depends on the model.
Please refer to the smartphone manufacturer
manual.