Verasys® 32 Point 24 VAC Application Controller Installation Instructions
11
Figure 11: LC-VAC300x-0 Physical Features
Table 1: LC-VAC300x-0 Physical Features
Callout
Physical Feature: Description and Reference
1
USB host port
2
Three configurable outputs: 0 to 10 VDC, 10 mA, 24 VAC externally sourced Triac outputs 0.5A (maximum) output
current
3
Three mounting clips
4
Four Binary Outputs: Relays SPST 5 (3A) (240 VAC), externally powered. Two relays support the selectable
hardware interlocking function. Each relay contact is independent with its own terminal.
5
Two binary outputs: 0.5 A Triac (24 or 240 VAC, externally powered). See Table 5
6
24 VAC utility output power for actuator supply
7
24 VAC, class 2 power supply terminal block. See the
Supply Power Terminal Block
section
8
Cover lift tabs.
9
Sensor Bus Port (RJ-12 6-pin Modular Jack) See
Sensor Bus Port
section.
10
LED status indicators. See Table 9.
11
Four keypad buttons.
12
Display with backlight.
13
Six Binary Inputs Terminal blocks (IN1–IN6). Dry contact maintained or pulse counter and accumulator mode. See
Table 5.
14
Six Universal Inputs (UI) terminal blocks. Voltage analog input 0–10 VDC. Current analog input 4–20 mA. Resistive
Analog Inputs (0 to 600 ohms) or Dry Contact Binary Input. See Table 5.
15
Dual-Stacked Connector. See the
Stacked System and Sensor Bus Terminal Block
section.
16
Modbus Communication Port. See
section.
17
PWM 0 to 15 VDC selectable 5V, 12V, and 15V at 10 mA, 100 Hz.
1
5
4
3
6
2
8
9
10
8
11
12
3
14
3
16
15
7
13
