12908357-180528EN(3)
Subject to misprints, errors and technical modifications.
Installation manual Sun awning V255 Salou
5.1 Setting the front bar
The right position can be achieved if the front bar connects perfectly to the top- and bottom cap if the awning is closed.
See figure 5.1.
Follow the steps below if the opening between the cap and the front bar is to large:
1. Unroll the awning until the arms and the fabric are completely tension free.
2.
At the end of the folding arms (on the side of the front bar), arm connections are located. See figure 5.1.
3. Twist the bolts #1 (allen 10) loose on both sides.
4. Put the front bar in the desired position.
5. Fasten the bolts #1.
6. Roll in the awning.
2
1
1
fig. 5.2 Detail arm connection on front bar
fig. 5.1 Position front bar
9
5. Front bar
Attention!
Never touch allen #2.
Attention!
The fabric should always be on the upperside.
